Non-local simulation of the stable boundary layer with a third order moments closure model

A new higher order closure model for the stable boundary layer is presented and compared with Large Eddy Simulation data. The model includes numerical solutions for the mean values, second and third order moments equations. A satisfactory agreement is found between the calculated vertical profiles of the turbulent quantities with those provided by the LES. Furthermore the new model results are compared with profiles obtained with a lower order closure model in order to verify the effective importance of including third order dynamical equations in the model.     

Experimental investigation using CFD for thermal performance of ventilated disc brake rotor

In the present work, different ventilated disc brake rotor configurations were analysed to enhance the heat transfer rate and obtain the uniform temperature distribution in the rotor. CFD code used in this work was validated at using experimental results obtained by conducting experiments on a test rig. The experimental analysis was performed to calculate the mass flow rate and heat dissipation through the rotor. Further, different types of rotor configurations viz. straight radial vane (SRV), tapered radial vane (TRV), alternate long and short vane (ALSV), variable diameter circular pillars (VDCP) were considered for the analysis. A rotor segment of 20° was considered for the numerical analysis due to its rotational symmetry. CFD results were in good agreement with the experiments. The maximum deviation of the numerical results were about 12 % from the experimental results. It is found from the analysis that among the different types of rotor configurations; variable diameter circular pillars (VDCP) rotor gives better rate of heat dissipation with more uniform temperature distribution in the flow passages. Hence for modern high speed vehicles VDCP rotor may be more appropriate.     

城市桥梁改造中的桥头交叉口典型问题及对策

早期桥梁建设中往往对桥头接线缺乏重视,运行至今,存在较多的道路交通问题。文章以福建省将乐县三华大桥桥头交叉口为分析对象,对旧桥改造中面临的一系列道路交通问题进行分析,并结合大桥实际情况,提出了相应的改善措施,供相关工程技术人员参考。     

Perturbation/correlation based optimal internal combustion engine tuning

This paper addresses the application of the perturbation/correlation method to optimizing the torque output of internal combustion engines. This application was inspired by observations of the limitations in current techniques of the automotive performance tuning industry. Performance issues such as errors from true optimum spark timing and fuel injector pulse width values as well as convergence were considered for optimal tuning. The ability of the system to deal with engine cycle-to-cycle variations and their effect on input parameters is also analyzed.     

Parameter transfer of common-metric attributes in choice analysis: implications for willingness to pay

There is a growing literature that promotes the presence of a mix of compensatory and semi-compensatory processing strategies in the way that individuals evaluate packages of attributes in real or hypothetical markets, and make choices. This paper proposes a specification for the utility form in a choice model to test if, given a pair of attributes with a common-metric (e.g., components of travel time or cost), the attribute with the dominating level defines the marginal (dis)utility that is assigned to both attributes. We refer to this processing strategy as a parameter transfer rule. We use a stated choice data set, in the context of car driving individuals choosing between tolled and non-tolled routes, to estimate a mixed logit model which incorporates the presence of the parameter transfer rule and the conventional fully compensatory rule, both existing up to a probability. We find that if this parameter transfer heuristic is part of the mix, the WTP is more than 30% higher, on average, than when only a fully compensatory rule is imposed. We also contrast the parameter transfer rule with other semi-compensatory heuristics which have been investigated in other papers, and show that the finding adds further support to the accumulating evidence that a semi-compensatory attribute processing rules tend to result in higher mean WTP estimates compared to the fully compensatory attribute processing rule.     

Net tax incidence for urban public transit subsidies in New Zealand

This paper examines the impact of policy changes in the funding of New Zealand public transit modes.These changes, introduced in 1983, are evaluated in terms of the net incidence of public transit subsidy assistance, taking into account its source of funding and the income class of those commuters benefiting from the subsidy. The general conclusion is that the net incidence of subsidy assistance remains progressive (i.e., a transfer from high to low income commuters) following the introduction of shared funding on the predominant public transit modes (rail and bus), sourced from income tax (central government) and property tax (regional/local government). However, because of the predominance of medium to high income commuters on rail vis-a-vis bus and the traditional source of funding on these modes in terms of income tax (a progressive tax source) and property tax (a regressive tax source), the degree of progressivity previously associated with public transit subsidies has now substantially reduced.The analysis and opinions expressed in this paper are the responsibility of the author alone and do not purport to represent the views of the Ministry of Transport.     

Off-set crack propagation analysis under mixed mode loadings

An assessment was carried out herein to study the eccentricity of cracks subjected to mixed-mode loadings. Several loading locations relative to a central line were selected to induce mixed-mode loadings, which were computed using a finite element method. An adaptive meshing technique was adopted during the simulation of crack propagation to ensure the singularity of stress at the tip of the crack. The stress intensity failure criterion was used and programmed, and the node splitting technique was used when the stress intensity factor reached the fracture toughness of the material to simulate crack propagations. It was found that large variations in the stress intensity factor were observed when off-set cracks were used, and that K _II decreased when loading distance increased, but increased when the off-set crack distance was increased. Both crack eccentricity and loading distance played important roles in producing mixed-mode loading, compared to the influence of central cracks. Correction factors were introduced to modify the calculation of stress intensity factors under mixed-mode loadings. Simulations of crack propagation were also conducted to study the effects of crack eccentricities and loading distances. It was found that the crack length, the loading distance relative to the central crack and the crack eccentricity dominated calculations of the integrity of cracked structures.     

Sampling of alternatives for route choice modeling

This paper presents a new paradigm for choice set generation in the context of route choice model estimation. We assume that the choice sets contain all paths connecting each origin–destination pair. Although this is behaviorally questionable, we make this assumption in order to avoid bias in the econometric model. These sets are in general impossible to generate explicitly. Therefore, we propose an importance sampling approach to generate subsets of paths suitable for model estimation. Using only a subset of alternatives requires the path utilities to be corrected according to the sampling protocol in order to obtain unbiased parameter estimates. We derive such a sampling correction for the proposed algorithm.Estimating models based on samples of alternatives is straightforward for some types of models, in particular the multinomial logit (MNL) model. In order to apply MNL for route choice, the utilities should also be corrected to account for the correlation using, for instance, a path size (PS) formulation. We argue that the PS attribute should be computed based on the full choice set. Again, this is not feasible in general, and we propose a new version of the PS attribute derived from the sampling protocol, called Expanded PS.Numerical results based on synthetic data show that models including a sampling correction are remarkably better than the ones that do not. Moreover, the Expanded PS shows good results and outperforms models with the original PS formulation.     

Development of a semi-empirical friction model in automotive driveshaft joints

High speed and sport utility vehicles with large joint articulation angle demand lower friction in automotive driveshaft joints to meet noise and vibration comfort levels. Thus a more thorough understanding of internal friction characteristics and mechanisms is required. In this paper, a friction model in automotive driveshaft joints was developed through the use of test data from an instrumented Constant Velocity (CV) joint friction apparatus with actual driveshaft assemblies. Experiments were conducted under different realistic operating conditions of oscillatory speeds, CV joint articulation angles, lubrication, and torque. The experimental data was used to develop a physics-based semi-empirical CV joint internal friction model as a function of different CV joint operating parameters. It was found that the proposed friction model captures the experimental results well. Also the friction model estimates the generated axial force (GAF) in tripod CV joints well, which is the main source of force that causes vehicle vibration problems.     

Interval estimation in the calibration of certain trip distribution models

This paper argues for interval, rather than point, estimation when calibrating some variants of the trip distribution “gravity” models. Analytic expressions are derived for the approximate asymptotic covariances of least squares and maximum likelihood estimates of the parameters in the impedance function under a variety of conditions. A comparative numerical example, and an application using migration flows, are also presented.